Sub-40 10K pace

Hold 6:26 per mile, or 4:00 per kilometre, for the whole 10K, and you finish under 40:00. Here are the mile and km splits, lap times, treadmill speed, and how to hold it.

6:26
per mile
4:00
per kilometre
1:36
per 400 m lap
9.4
mph (15.0 km/h)

What pace is a sub-40 10K?

To run a sub-40 10K, you need to hold 6:26 per mile, which is 4:00 per kilometre, for the whole 10K (6.2 miles, 10 km). Hold it evenly from start to finish and you cross the line just under 40:00. 4:00 per kilometre lands exactly on 40:00, with no margin, so aim a second or two per kilometre quicker.

On a track that is 1:36 per 400 m lap (0:48 per 200 m). On a treadmill, set the belt to 9.4 mph (15.0 km/h) and add 1% incline to match the effort of the road; the treadmill pace calculator converts any other speed.

Sub-40 10K mile splits

MileElapsed time
16:26
212:52
319:18
425:44
532:11
638:37
6.2 (finish)40:00
Even-pace mile splits for 40:00. Reach each mile marker at or just before this time. Write them on a pace band, or let a tone hold the pace for you.

Sub-40 10K km splits

DistanceElapsed time
1 km4:00
2 km8:00
3 km12:00
4 km16:00
5 km20:00
6 km24:00
7 km28:00
8 km32:00
9 km36:00
10 km (finish)40:00
Even-pace splits for 40:00 over the 10K. Aim to reach halfway a few seconds behind these and finish a few ahead. A slight negative split is safer than banking time early.

Is a sub-40 10K a realistic goal?

It depends on where you are now, but the honest test is whether you can already hold close to 6:26 per mile (4:00/km) for a shorter effort. This is a highly competitive amateur time, the same pace as a 20-minute 5K sustained for twice as long. It's rare outside runners with a genuine competitive background and a structured training history.

The 10K sits on your threshold, the effort you can just hold. Train it with tempo runs and longer intervals (say, 1 km repeats at goal pace), plus easy volume. Race the middle evenly; do not bank time in the first 2 km.

What times does sub-40 10K pace predict at other distances?

If you can run a sub-40 10K, you're roughly capable of these times at other distances, estimated with the Riegel formula, which scales a known time by distance. Real results vary with training and terrain (long-distance predictions are optimistic if your mileage is low), but it's a useful reality check. The race time predictor does this for any time.

DistanceEquivalent timePace / milePace / km
Mile5:465:463:35
5K19:116:103:50
10K (this goal)40:006:264:00
Half marathon1:28:156:434:10
Marathon3:04:007:014:21

How do you hold sub-40 10K pace on the day?

Know the number, then hold it evenly. Most people miss a goal like this by starting too fast and fading late, when they still had the fitness to finish. Read the full 10K pacing guide, work splits with the pace calculator, and see how this pace compares on the pace charts.

Set 4:00/km (6:26/mile) as your target in Steady Pace and hold it by ear: a tone rises the moment you slow below sub-40 10K pace and falls when you drift too fast, so you catch the surge in the first kilometre instead of the last.

What pace do I need for a sub-40 10K?

6:26 per mile, or 4:00 per kilometre, held for the full 10K (6.2 miles). At that pace you finish just under 40:00.

What are the mile splits for a sub-40 10K?

At an even 6:26 per mile you pass mile 1 in 6:26, mile 2 in 12:52, mile 3 in 19:18, and finish in 40:00.

What is sub-40 10K pace on a treadmill?

9.4 mph, or 15.0 km/h. Set 1% incline to match the effort of running outdoors on the flat.

What lap time is sub-40 10K pace on a 400 m track?

1:36 per 400 m lap, or 0:48 per 200 m.

Should I run a sub-40 10K as an even or negative split?

Even, or a slight negative split. Reach halfway just behind goal pace and finish just ahead. Going out faster than 6:26/mile almost always costs you more time later than it saves early.

Hold your pace by ear

Set a target pace. A tone rises when you slow and falls when you speed up, so you hold it without looking at your phone. No ads, no account, no subscription.

Download on the App Store